How to change wiper blades in vehicle?

Here is a general process for changing wiper blades on a vehicle:

1. Locate the wiper blade assembly on the vehicle. This is typically located on the driver's side and passenger's side of the front windshield.

2. Lift the wiper arm away from the windshield. The wiper arm is the metal piece that holds the wiper blade in place.

3. Look for a small tab or lever on the underside of the wiper blade assembly. This tab or lever is used to release the blade from the wiper arm.

4. Once the tab or lever is located, press or slide it in the direction indicated to release the wiper blade from the wiper arm.

5. Carefully remove the wiper blade from the wiper arm.

6. Take the new wiper blade out of the packaging and remove any protective plastic or tape from the blade.

7. Position the new wiper blade on the wiper arm, making sure it is aligned properly.

8. Secure the new wiper blade in place by pressing or sliding the tab or lever back into its original position.

9. Lower the wiper arm back onto the windshield and test the wiper blade to make sure it is functioning properly.

Note: The process for changing wiper blades may vary depending on the make and model of the vehicle. It is recommended to consult the owner's manual or a repair manual for specific instructions.